 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| T-1 3/4 (5mm) SOLID STATE LAMP PRELIMINARY SPEC ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Part Number: WP7114RWC/Z WHITE Description The source color devices are made with InGaN Light Emitting Diode. Features LOW POWER CONSUMPTION. POPULAR T-1 3/4 DIAMETER PACKAGE. GENERAL PURPOSE LEADS. RELIABLE AND RUGGED. LONG LIFE - SOLID STATE RELIABILITY. AVAILABLE ON TAPE AND REEL. MOISTURE SENSITIVITY LEVEL : LEVEL 1. ELECTROSTATIC DISCHARGE THRESHOLD (HBM):1000V. TYP. COLOR TEMPERATURE:6500K. COLOR COORDINATES:X=0.33,Y=0.34 ACC. TO CIE1931(WHITE). OPTICAL EFFICIENCY: 65.6 lm/W(TYP.) COLOR REPRODUCTION INDEX:80. RoHS COMPLIANT. Static electricity and surge damage the LEDS. It is recommended to use a wrist band or anti-electrostatic glove when handling the LEDs. All devices, equipment and machinery must be electrically grounded. Applications Furniture lighting Outdoor displays Optical indicators Signal and symbol luminaire Marker lights (e.g. steps, exit ways, etc.) Lighting for special effects (e.g. starry sky) Substitute for miniature flashlight Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is 0.25(0.01") unless otherwise noted. 3. Lead spacing is measured where the leads emerge from the package. 4. Specifications are subject to change without notice. SPEC NO: DSAG9988 APPROVED: J. Lu REV NO: V.1 CHECKED: Allen Liu DATE: NOV/22/2006 DRAWN: Z.Z.YANG PAGE: 1 OF 7 ERP:1101019912 Selection Guide Part No. Dice Lens Type luminous Intensity Iv(mcd) @ 20mA Min. WP7114RWC/Z WHITE (InGaN) WATER CLEAR 4700 Typ. 9500 Note2 v (mlm) @ 20mA Typ. 4200 Note3 Viewing Note1 Angle 21/2 20 Absolute Maximum Ratings at TA=25C Parameter Power dissipation Reverse Voltage Junction temperature Operating Temperature Storage Temperature DC Forward Current Peak Forward Current Thermal resistance Note5 Junction/ambient Junction/solder point Note4 Symbol Pt VR TJ Top Tstg IF IFM Rth JA Rth JS Value 111 5 110 -40 To +85 -40 To +100 30 100 350 130 Unit mW V C C C mA mA C/W C/W Notes: 1.1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. 2.Luminous intensity is measured by a current pulse of 10ms at a tolerance of 15%. 3.The typical data of Luminous Flux can only reflect statistical figures, actual parameters of individual product could differ from the typical data. For the purpose of product enhancement, the typical data is subject to change without prior notice. 4.1/10 Duty Cycle, 0.1ms Pulse Width. 5.Rth(J-A) Results from mounting on PC board FR4 (pad size 16 mm2 per pad), Electrical / Optical Characteristics at TA=25C Parameter Chromaticity coordinate x acc.to CIE1931 IF=20mA [Typ.] Chromaticity coordinate y acc.to CIE1931 IF=20mA [Typ.] Forward Voltage IF=20mA [Min.] Forward Voltage IF=20mA [Typ.] Forward Voltage IF=20mA [Max.] [Typ.] IR Reverse Current (VR=5V) [Max.] TC x 10 -0.1 Temperature coefficient of x IF=20mA, -10C T100C [Typ.] Temperature coefficient of y IF=20mA, -10C T100C [Typ.] Temperature coefficient of VF IF=20mA, -10C T100C [Typ.] VF Note2 Symbol X Y Note1 Value 0.33 0.34 2.7 3.2 3.7 0.01 Unit - Note1 V Reverse Current (VR=5V) A 10-3 /C 10-3 /C TCy -0.2 TCV -2.5 mV/C Notes: 1.Chromaticity coordinates are measured by a current pulse of 20ms with a tolerance of 0.01 in X and Y color coordinates. 2.Forward voltage is measured with a current pulse of 10ms at a tolerance of 0.1V. SPEC NO: DSAG9988 APPROVED: J. Lu REV NO: V.1 CHECKED: Allen Liu DATE: NOV/22/2006 DRAWN: Z.Z.YANG PAGE: 2 OF 7 ERP:1101019912 Brightness codes luminous Intensity Iv(mcd) @ 20mA Code. ZD ZE ZF ZG ZH ZM ZN ZP Min. 4700 5700 6700 7500 8000 10000 12000 16000 Note1 v (mlm) @ 20mA Max. 6500 7500 8500 10000 12000 16000 20000 24000 Typ. 2500 2900 3400 3900 4500 5900 7500 9500 Note2 Notes: 1.Luminous intensity is measured by a current pulse of 10ms at a tolerance of 15%. 2.The typical data of Luminous Flux can only reflect statistical figures, actual parameters of individual product could differ from the typical data. For the purpose of product enhancement, the typical data is subject to change without prior notice. White WP7114RWC/Z SPEC NO: DSAG9988 APPROVED: J. Lu REV NO: V.1 CHECKED: Allen Liu DATE: NOV/22/2006 DRAWN: Z.Z.YANG PAGE: 3 OF 7 ERP:1101019912 White WP7114RWC/Z SPEC NO: DSAG9988 APPROVED: J. Lu REV NO: V.1 CHECKED: Allen Liu DATE: NOV/22/2006 DRAWN: Z.Z.YANG PAGE: 4 OF 7 ERP:1101019912 Color Codes WP7114RWC/Z SPEC NO: DSAG9988 APPROVED: J. Lu REV NO: V.1 CHECKED: Allen Liu DATE: NOV/22/2006 DRAWN: Z.Z.YANG PAGE: 5 OF 7 ERP:1101019912 WP7114RWC/Z Recommended Soldering Pattern (Units : mm; Tolerance: 0.1) SPEC NO: DSAG9988 APPROVED: J. Lu REV NO: V.1 CHECKED: Allen Liu DATE: NOV/22/2006 DRAWN: Z.Z.YANG PAGE: 6 OF 7 ERP:1101019912 PACKING & LABEL SPECIFICATIONS WP7114RWC/Z SPEC NO: DSAG9988 APPROVED: J. Lu REV NO: V.1 CHECKED: Allen Liu DATE: NOV/22/2006 DRAWN: Z.Z.YANG PAGE: 7 OF 7 ERP:1101019912 |
Price & Availability of WP7114RWCZ
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |